How to Cut a Garden Hose

Are you buying your first garden hose? Maybe you're looking to repair an old one? Either way, as soon as you buy it or uncoil it, you'll probably want to cut it down to size.

List of What You Need

Before you get started, you should gather these few materials around the house: the garden hose, scissors, and enough space to lay the hose out.

Measuring the Length of Hose you Need

You'll need to figure out how much of the hose you need and that can be done by deciding how long you want the hose. It's always better to cut it a little bit shorter, so plan for that. Take out a measuring tape to find out the exact length of the hose.

Lay the Hose Straight for the Cut

Lay the hose flat on the floor or ground after finding out the length, as this will make the cutting process easier. Make sure the hose is completely straight and not curled up to prevent any errors while cutting it.

Cut the Excess Length

This is the final step. Take the scissors and cut off the excess length of the hose. Make sure the cut is clean and even. This stops you from having an uneven texture at the cut end.

Connect the Attachments

Once the hose is cut to size, all that is left is to attach the end pieces, if needed. Connect the necessary attachments at both ends of the garden hose and you're good to go.

In Summary

When you're looking to cut your garden hose down to size, make sure to have scissors and a measuring tape handy. Once you've measured the length, lay the hose straight and then cut any excess length. Finish up by attaching the end pieces, if any, to the garden hose and you're all done.